If you've been planning a motorbike road trip for weeks, but when you open the garage door, You see that your motorbike tire has a problem and needs to be replaced quickly.
Nah, Experienced riders will already know how to change a motorbike tire, this might be a simple solution. If you are not sure, It's a good idea to learn what to do to change a motorbike tire.
Quoted by otodiva.com from nationwide.com, Following are the steps for changing a motorbike tire. Come on, let's see!
Steps 1: Release the wheel
Lift the end of the bike to lift the wheel off the ground. Use a socket to loosen and remove the shaft. Release the chain and remove the brake caliper. Return your axle to its place to hold the caliper in position.
It's best to read the manual first to learn any steps to take for your make and model of motorbike.
Steps 2: Deflate the tire
To deflate the tire, unscrew the valve cover and remove the valve stem core with a special tool. Some valve stems come with built-in caps instead of separate parts.
When you wonder how to change a motorcycle tire, You may not realize that you need a tool to change a motorcycle tire. However, You don't want to damage your valve stem by trying to remove it with something from the garage. If you don't have it yet, pause the project and head to the local auto supply store to get a valve core remover.
Steps 3: Crack the bead
The bead is the inside edge of the tire where it meets the rim. At the auto parts store, You can also purchase a bead breaker tool to make the job easier. Try to find one tool, which you will use to release the tire from the rim.
Insert the chisel between the tire and the wheel rim and move the chisel around the bead. Flip the tire over and repeat this process on the other side. You can use a spray silicone lubricant or glass cleaner to prevent the beads from re-sticking when you move the tool.
Steps 4: Conkel beads to the top and edges
Carefully insert the tire scoop under the bead and press down to pull the tire up. Leave the tire scoop where you pulled the tire to hold it in place.
Use a second tire spoon to remove the tire from the rim, set aside a few inches from the first tire scoop. Leave the second spoon where it started. Take the first spoon and move it a few inches. Repeat this until the entire tire is off the rim. Then flip the wheel over and repeat the process on the other side.
Alternative steps: If your tire has a tube, You will need to remove the valve stem from the rim and remove the old tube.
Steps 5: Clean the inside of the new rim and tire
Clean the inside of the rim and the inside of the new tire to ensure there is no dirt. Coat the edge of the new tire with bead lube. Hand sanitizer or hand soap can also be used in a pinch.
Steps 6: Install new tires
Use a tire scoop to carefully wedge the entire tire under the rim on one side. Flip the wheel over and repeat this process on the other side.
Steps 7: Reinstall the valve stem core and inflate the tire
Fill the tire until it sits completely along the rim. Be sure to check the air pressure. You may have to inflate your tires past the recommended driving pressure.
Steps 8: Replace the wheel onto the motorcycle
Follow your user manual's instructions to reinstall the wheel. Check air pressure again and adjust rear wheel alignment. Make sure all fasteners are tight before you get out.
Owning a motorbike offers great recreational opportunities, but also accompanied by responsibility. From insuring your motorbike to maintaining it, remember to take the time to properly maintain your motorbike and learn safety tips for riding a motorbike. Before you start your next adventure, talk to an insurance agent to make sure your motorcycle has the level of insurance coverage you need.
Read Also, How to Avoid Driving Mistakes That Mamskis Often Make
